


MICRO TECH LT-10S ECU
The LT-10c caters for both a first time user or experienced tuner, with it’s easy to use tuning software via laptop or the MicroTech handset , simple and straightforward installation and it’s extremely attractive price.
The LT-10c comes standard with 4 injector and 4 ignition outputs and is capable of working with most common engines up to, 8 cylinders and 2 rotors. The LT-10c will support most factory ignition systems, such as multi coil and distributor, as well as aftermarket ignition systems such as CDI or MSD. However, the LT-10c is most commonly used with the MicroTech X4 igniter box, providing an extremely high output direct fire ignition system at a very reasonable price. (Click on picture for a larger view)
No product
Products and Parts
We carry a wide range of products to suit a variety of budgets and need for your Rotary engine vehicle. Our most popular products are ready for purchase as shown below.
Please call or send an email for more information on products, current promotions and custom options.
Note :
All prices are in $AUD.
International post will be a different price.
Adding insurance on your item will be an extra cost.
Please contact us for international postage price and insurance cost.
All products listed below are also available for pick up by the buyer.
MICRO TECH LT-10S ECU
The LT-10c caters for both a first time user or experienced tuner, with it’s easy to use tuning software via laptop or the MicroTech handset , simple and straightforward installation and it’s extremely attractive price.
The LT-10c comes standard with 4 injector and 4 ignition outputs and is capable of working with most common engines up to, 8 cylinders and 2 rotors. The LT-10c will support most factory ignition systems, such as multi coil and distributor, as well as aftermarket ignition systems such as CDI or MSD. However, the LT-10c is most commonly used with the MicroTech X4 igniter box, providing an extremely high output direct fire ignition system at a very reasonable price. (Click on picture for a larger view)
Price: $1,050.00

WATER SEAL KIT (EARLY)
To suit 12A SERIES 1,2,3.. 13B RX4/RX5. (Click on picture for a larger view )
Price: $270.00

2L ROTOR SHAPED SURGE TANK
2L polished stainless steel Surge Tank. Out lets are 3/8 npt. Pre pump inlet are 3/8 npt. Fuel rail return are 1/8 npt. Over flow to fuel tank are 1/8 npt. Brass barb Male fittings included. If you are wanting flare -6 or -8 male fittings let us no and we will make to suit your needs
Price: $225.00
No product

SERIES 6 13B TWIN TURBO ENGINE
Complete minus alternator, ecu and wiring loom
Price: $2,400.00
No product

COOPER OIL FILTER Z79A
To suit 13B Rotaries from Series 4 RX7 onwards turbo or non turbo and also 20b engines. It is Interchangerable with WZ79. Price includes postage and handling
Price: $6.50
No product

NGK RACING BR9EG SPARK PLUGS
To suit 12A , 13B , 20B , 26B turbo or non turbo Rotary engines. Comes in a pack of 4.
Price: $45.00
No product

NGK B9ES SPARK PLUG
To suit 12A, 13B, 20B, 26B turbo or non turbo rotary engines. Comes in a pack of 4.
Price: $16.80
No product

WATER PUMP
GMB WATER PUMP MADE IN JAPAN. TO SUIT EARLY 13B RX4, RX5 12A S1, S2, S3 RX7. COMES WITH WATER PUMP GASKET. POSTAGE INCLUDES REGISTERED POST.
Price: $86.90
No product

WATER PUMP
GMB WATER PUMP. MADE IN JAPAN. TO SUIT S6, S7, S8 TWIN TURBO RX7.COMES WITH WATER PUMP GASKET. POSTAGE INCLUDES REGISTERED POST.
Price: $132.00
No product

WATER PUMP
GMB WATER PUMP.MADE IN JAPAN. TO SUIT S4/5 13B TURBO RX7. COMES WITH WATER PUMP TO WATER PUMP HOUSING GASKET / WATER PUMP HOUSING TO BLOCK GASKET, 4 PULLEY STUDS AND O RING. POSTAGE INCLUDES REGISTERED POST.
Price: $132.00
No product

WALBRO HI FLOW INTAKE FUEL PUMP
WALBRO HI FLOW INTAKE FUEL PUMP.FLOWS 255L P/HR. TO SUIT S4,S5 RX7 SINGLE TURBO OR NON TURBO. S6, S7, S8 RX7 TWIN TURBO. GOOD TO USE AS A PRE PUMP OR A MAIN PUMP.IT WILL FLOW MORE FUEL THAN A STANDARD PUMP. POSTAGE INCLUDES REGISTERED POST.
Price: $192.50
No product

BOSCH MOTORSPORT 044 FUEL PUMP
GOOD FOR 500+ HORSEPOWER. THIS IS A GENUINE BOSCH 044 PRODUCT. POSTAGE INCLUDES REGISTERED POST.
Price: $198.00
No product

BOSCH HEC 715 COIL
GOOD TO USE WHEN RUNNING AN AFTER MARKET ECU. CAN BE SOLD INDIVIDUALLY OR A QTY OF 4, 6 AND 8. PRICE IS FOR 1 ONLY. POSTAGE INCLUDES REGISTERED POST.
Price: $58.00
No product

BOSCH FUEL PUMP BRACKET( BILLOT)
Comes in black, gold, blue , red, natural, purple. Please note upon checkout which colour you would like to purchase and the number of QTY. (Click on picture for a larger view)
Price: $50.00
No product

CARTER BLACK ELEC F/PUMP 14-16 PSI
THIS CARTER PUMP CAN BE USED AS A PRE PUMP OR USED TO FEED FUEL TO THE CARBY.. ALSO COMES WITH MOUNTING BRACKET,HOSE FITTINGS,WASHERS,NUTS & BOLTS, RUBBER GROMETS. (Click on picture for a larger view)
Price: $160.00
No product

12A TURBO ENGINE REBUILD KIT
QTY X6 APEX SEAL 12A TURBO X6 APEX SEAL SPRING X12 CORNER SEAL RUBBER X12 CORNER SEAL(KEYHOLE) X12 CORNER SEAL SPRING X12 SIDE SEAL X12 SIDE SEAL SPRING X4 INNER OIL CONTROL O RING X4 OUTER OIL CONTROL O RING X4 INNER OIL SEAL SPRING X4 OUTER OIL SEAL SPRING X4 INNER O RING CASE X4 OUTER O RING CASE X1 GASKET SET (INCLUDES WATER SEAL KIT) X1 FRONT MAIN SEAL X1 REAR MAIN SEAL
Price: $1,200.00
No product

POLISHED ALUMINIUM BLOCK OFF PLATE (12A,12ATBO,13B RX4, RX5)
TO SUIT 12A & 12A TURBO 13B RX4,RX5 FRONT COVER. REQUIRED WHEN REMOVING OIL METERING PUMP. PRICE INCLUDES POSTAGE AND HANDLING ANYWHERE IN AUSTRALIA. (Click on picture for a larger view)
Price: $15.00
No product

POLISHED ALUMINIUM BLOCK OFF PLATE(13B S4)
TO SUIT 13B SERIES 4 TURBO AND NON TURBO FRONT COVER. REQUIRED WHEN REMOVING OIL METERING PUMP. PRICE INCLUDES POSTAGE AND HANDLING ANYWHERE IN AUSTRALIA. (Click on picture for a larger view)
Price: $15.00
No product

POLISHED ALUMINIUM BLOCK OFF PLATE(13B S5)
TO SUIT 13B SERIES 5 TURBO AND NON TURBO FRONT COVER. REQUIRED WHEN REMOVING OIL METERING PUMP. PRICE INCLUDES POSTAGE AND HANDLING ANYWHERE IN AUSTRALIA. (Click on picture for a larger view)
Price: $18.00
No product

(OUT OF STOCK) 12A TURBO FRONT COVER
12a front cover modified to suit turbo application.Fitted with - 8 male speed flow fitting and polished oil metering pump blank off plate. Front cover will also fit 13B & 20B engines and has also been freshly painted in 2 pac silver. Price includes the complete front cover. Postage covers to anywhere in Australia. (Click on picture for a larger view)
Price: $150.00
No product

16"STRAIGHT BLADE RADIATOR FAN (PULLER)
New in box Brand name is SPAL Made in Italy Air Flow CFM 1601, Draws 11 AMPS.
Price: $295.00
No product