-
   Products and Parts
 
 
We carry a wide range of products to suit a variety of budgets and needs. Our most popular products are ready for purchase as shown below.
 
Please call or  send an email for more information on products, current promotions and custom options.
 
Note :
All prices are in $AUD.
International post  will be a different price.
Adding insurance on your item will be an extra cost.
Please contact us for international postage price and insurance cost.
All products listed below are also available for pick up by the buyer.
 
MICRO TECH LT-10S ECU
Micro Tech LT-10S Fuel ignition engine management system with complete wiring loom included.
- Suitable for 4 cylinder, 12A, 13B rotary crank angle sensor engine systems.
- Will need 4 coils to operate.
- Can be tuneable to 20psi boost.
- Extra input and output included.
- No handset included.
(Click on picture for a larger view)
Price: $1,150.00
WATER SEAL KIT (EARLY)
To suit 12A SERIES 1,2,3.. 13B RX4/RX5.
(Click on picture for a larger view )
Price: $155.00
2L ROTOR SHAPED SURGE TANK
2L polished stainless steel Surge Tank.
Out lets are 3/8 npt.
Pre pump inlet are 3/8 npt.
Fuel rail return are 1/8 npt.
Over flow to fuel tank are 1/8 npt.
Brass barb Male fittings included.
If you are wanting flare -6 or -8 male fittings let us no and we will make to suit your needs
Price: $225.00
WURTH SEAT COVER
Brand new in packaging Wurth seat cover . Price includes postage and handling
Price: $15.00
SERIES 4 13B TURBO ENGINE
Complete minus alternator, ecu and wiring loom
Price: $1,750.00
SERIES 6 13B TWIN TURBO ENGINE
Complete minus alternator, ecu and wiring loom
Price: $2,400.00
COOPER OIL FILTER Z79A
To suit 13B Rotaries from Series 4 RX7 onwards turbo or non turbo and also 20b engines.
It is Interchangerable with WZ79.
Price includes postage and handling
Price: $6.50
NGK RACING BR9EG SPARK PLUGS
To suit 12A , 13B , 20B , 26B turbo or non turbo Rotary engines.
Comes in a pack of 4.
Price: $45.00
NGK B9ES SPARK PLUG
To suit 12A, 13B, 20B, 26B turbo or non turbo rotary engines. Comes in a pack of 4.
Price: $16.80
WATER PUMP
GMB WATER PUMP MADE IN JAPAN. TO SUIT EARLY 13B RX4, RX5 12A S1, S2, S3 RX7. COMES WITH WATER PUMP GASKET.
POSTAGE INCLUDES REGISTERED POST.
Price: $86.90
WATER PUMP
GMB WATER PUMP. MADE IN JAPAN. TO SUIT S6, S7, S8 TWIN TURBO RX7.COMES WITH WATER PUMP GASKET. POSTAGE INCLUDES REGISTERED POST.
Price: $132.00
WATER PUMP
GMB WATER PUMP.MADE IN JAPAN. TO SUIT S4/5 13B TURBO RX7. COMES WITH WATER PUMP TO WATER PUMP HOUSING GASKET / WATER PUMP HOUSING TO BLOCK GASKET, 4 PULLEY STUDS AND O RING.
POSTAGE INCLUDES REGISTERED POST.
Price: $132.00
WALBRO HI FLOW INTAKE FUEL PUMP
WALBRO HI FLOW INTAKE FUEL PUMP.FLOWS 255L P/HR.
TO SUIT S4,S5 RX7 SINGLE TURBO OR NON TURBO.
S6, S7, S8 RX7 TWIN TURBO.
GOOD TO USE AS A PRE PUMP OR A MAIN PUMP.IT WILL FLOW MORE FUEL THAN A STANDARD PUMP.
POSTAGE INCLUDES REGISTERED POST.
Price: $192.50
BOSCH MOTORSPORT 044 FUEL PUMP
GOOD FOR 500+ HORSEPOWER.
THIS IS A GENUINE BOSCH 044 PRODUCT.
POSTAGE INCLUDES REGISTERED POST.
Price: $198.00
BOSCH HEC 715 COIL
GOOD TO USE WHEN RUNNING AN AFTER MARKET ECU.
CAN BE SOLD INDIVIDUALLY OR A QTY OF 4, 6 AND 8. PRICE IS FOR 1 ONLY.
POSTAGE INCLUDES REGISTERED POST.
Price: $58.00
 
 
 
BOSCH FUEL PUMP BRACKET( BILLOT)
Comes in black, gold, blue , red, natural, purple.

Please note upon checkout which colour you would like to purchase and the number of QTY.
(Click on picture for a larger view)
Price: $50.00
CARTER BLACK ELEC F/PUMP 14-16 PSI
THIS CARTER PUMP CAN BE USED AS A PRE PUMP OR USED TO FEED FUEL TO THE CARBY.. ALSO COMES WITH MOUNTING BRACKET,HOSE FITTINGS,WASHERS,NUTS & BOLTS, RUBBER GROMETS.
(Click on picture for a larger view)
Price: $160.00
12A TURBO ENGINE REBUILD KIT
QTY
X6 APEX SEAL 12A TURBO
X6 APEX SEAL SPRING
X12 CORNER SEAL RUBBER
X12 CORNER SEAL(KEYHOLE)
X12 CORNER SEAL SPRING
X12 SIDE SEAL
X12 SIDE SEAL SPRING
X4 INNER OIL CONTROL
O RING
X4 OUTER OIL CONTROL
O RING
X4 INNER OIL SEAL SPRING
X4 OUTER OIL SEAL SPRING
X4 INNER O RING CASE
X4 OUTER O RING CASE
X1 GASKET SET (INCLUDES
WATER SEAL KIT)
X1 FRONT MAIN SEAL
X1 REAR MAIN SEAL
Price: $1,200.00
POLISHED ALUMINIUM BLOCK OFF PLATE (12A,12ATBO,13B RX4, RX5)
TO SUIT 12A & 12A TURBO 13B RX4,RX5 FRONT COVER.
REQUIRED WHEN REMOVING OIL METERING PUMP.
PRICE INCLUDES POSTAGE AND HANDLING ANYWHERE IN AUSTRALIA.
(Click on picture for a larger view)
Price: $15.00
POLISHED ALUMINIUM BLOCK OFF PLATE(13B S4)
TO SUIT 13B SERIES 4 TURBO AND NON TURBO FRONT COVER.
REQUIRED WHEN REMOVING OIL METERING PUMP.
PRICE INCLUDES POSTAGE AND HANDLING ANYWHERE IN AUSTRALIA.
(Click on picture for a larger view)
Price: $15.00
POLISHED ALUMINIUM BLOCK OFF PLATE(13B S5)
TO SUIT 13B SERIES 5 TURBO AND NON TURBO FRONT COVER.
REQUIRED WHEN REMOVING OIL METERING PUMP.
PRICE INCLUDES POSTAGE AND HANDLING ANYWHERE IN AUSTRALIA.
(Click on picture for a larger view)
Price: $18.00
12A TURBO FRONT COVER
12a front cover modified to suit turbo application.Fitted with - 8 male speed flow fitting and polished oil metering pump blank off plate. Front cover will also fit 13B & 20B engines and has also been freshly painted in 2 pac silver.
Price includes the complete front cover.
Postage covers to anywhere in Australia.
(Click on picture for a larger view)
Price: $150.00
16"STRAIGHT BLADE RADIATOR FAN (PULLER)
New in box
Brand name is SPAL
Made in Italy
Air Flow CFM 1601,
Draws 11 AMPS.
Price: $295.00